Another will this fit wheel thread

Hoping some of the wheel gurus can help me out with some fitment advice.

I'm looking at a set of SSR TF1 in 18" and these are the widths and offsets I'm looking at. They've got other measurements to calculate caliper clearance based on what they call different discs. They've got Super Low (SL), Normal (NR), Mid Pad (MD) and High Pad (HP). How I understand this is HP will provide the greatest brake clearance at the expense of lip size. MD has less clearance than HP by 10mm, NP has less clearance than HP by 17mm, and SL has less clearance than HP by 30mm.



So for someone with minimal expertise in wheel fitment, all these possible permutations is way over my head. Ideally, if I could run Super Low caliper clearance, I could get more lip out of it the wheels. These are the offset options:

18x9 +24 (NR)= 2.7" lip
18x9 +29 (MD)= 2.2" lip
18x9 +24 (SL) = 3.1" lip

18x11 +11 (NR)= 4.2" lip
18x11 +16 (MD)= 3.6" lip
18x11 +11 (SL) = 4.7" lip

I'm hoping to maximize the lips, but I know the offsets will be tight without rolling the fenders. Tire sizes I'll be running are 235/35/18 and 295/30/18 and eventually switching the fronts to 245s when I need new tires. Brakes are stock.

Hoping you guys can provide a bit of insight and see if I'd run into any rubbing issues on these wheels with the most aggressive disc. I'm lowered on TCK SA. I've attached a picture as ride height reference.

Another will this fit wheel thread